Apply the epoxy to a new crack and add your next piece. Mix more epoxy with a small amount of mica powder in a new plastic cup or tray. Once your first 2 pieces are dry, repeat this entire process again. If you have a ton of epoxy left over, it’s a sign that you should mix less of it the next time you do this!Ĭontinue this process until you have finished adding all of the broken pieces.You can also simply load the middle of the seam up with a thicker layer of epoxy and let it spread naturally when you squeeze the pieces together. If you’re using a thin layer of epoxy, spread the material over the exposed surface entirely.When you press the 2 pieces together, any thick globs of epoxy are just going to squeeze past the sides anyway, so there’s no real benefit to using a lot of the epoxy.Reload the swab or mixing stick whenever it looks like there isn’t any epoxy coming off of the tip.Either cover the cracked surface entirely in a thin layer, or add smaller, thicker lengths of epoxy along the center of the seam that you’re gluing. You do not need a lot epoxy, so gently drag the edge of your swab or stick across the surface to apply a thin layer of the epoxy. Pick your first piece up and gently dab the epoxy solution into the exposed crack with your cotton swab or mixing stick. Apply the epoxy solution to the crack on the largest broken piece.
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |